We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Polyethylene Powder.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Polyethylene Powder - List of Manufacturers, Suppliers, Companies and Products

Polyethylene Powder Product List

1～3 item / All 3 items

Displayed results
Alternative to PTFE particles! Microparticle polyethylene powder for surface modification.

Alternative to PTFE particles! Microparticle polyethylene powder for surface modification.

Improved surface slip resistance, scratch resistance, and wear resistance without using PTFE powder. Ultra-high molecular weight polyethylene with a spherical shape and narrow particle size distribution, excellent dispersibility.

High-dispersion coatings use PTFE powder as an additive, but due to regulatory trends regarding PFAS and similar substances, the future of continued use is uncertain. This product can be switched from PTFE. It has already been adopted in many coatings such as urethane-based, acrylic-based, and epoxy-based. 【Comparison with PTFE】 - Dispersion Stability: Easier to disperse in coatings compared to PTFE, with excellent storage stability. - Slipperiness: Provides good slipperiness with a smaller amount of additive compared to PTFE. It also has a matte finish effect. - Effectiveness: Lighter specific gravity than PTFE allows for greater presence on the coating surface, maintaining slipperiness for a long time. - Applications: Usable not only in solvent-based systems but also in water-based systems with just a small amount of dispersant. 【Properties】 - Particle Size: Average particle size is 10μ to 60μ (traditional ultra-high molecular weight PE typically has particle sizes over 100μ). - Chemical Resistance: High stability against acids, alkalis, and organic chemicals. - Non-Absorbent: Almost no water absorption or moisture absorption, preventing swelling or hydrolysis, and eliminating the need for preheating. - Hygiene: Brands compliant with FDA standards and suitable for polyvinyl chloride are also available. *For more details, please refer to the PDF document or feel free to contact us.*

  • PM-200.png
  • 木工.png
  • 携帯.png
  • パウダー.png
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Development of ultra-fine particle grade! High molecular polyethylene with even smaller particle diameter.

Development of ultra-fine particle grade! High molecular polyethylene with even smaller particle diameter.

Can be added to inks and coatings for thin films, as well as thin film coatings, to improve lubricity, wear resistance, durability, and noise reduction. Can be used as a substitute for PTFE.

This is an ultra-high molecular weight polyethylene powder with excellent dispersion, featuring a spherical shape and narrow particle size distribution, compared to conventional ultra-high molecular weight polyethylene. 【Features of the Developed Product】 ■ Ultra-high molecular weight PE with extremely small particle size By reducing the particle size to a minimum of 6μm, it can be applied to uses such as transparency and thin films. 【Basic Characteristics】 ■ Spherical small particle size Excellent dispersion. The small particle size and spherical shape contribute to superior dispersion. ■ Narrow particle size distribution Boasts a narrower particle size distribution compared to other particles, resulting in fewer coarse particles. ■ Wear resistance By adding it to various substrates, it is possible to improve the wear resistance of the substrate. ■ Sliding properties By adding it to various substrates, it is possible to enhance the sliding properties of the substrate. ■ High stability against acids, alkalis, and organic chemicals. ■ Hygiene We also offer grades that comply with FDA standards and are suitable for the Polyethylene Association. 【Expected Performance】 - Improvement in wear resistance and durability - Enhancement of sliding properties - Hardness adjustment - Weight reduction - Maintenance of tensile strength - Direct food contact *For more details, please refer to the PDF document or feel free to contact us.

  • 金属部品　写真.jpg
  • 缶.png
  • ゴム改質.jpg
  • ギア　写真 low. NEWjpg.jpg
  • Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTFE substitute for micro-particle polyethylene powder used for improving the sliding properties of coatings, rubber, etc.

PTFE substitute for micro-particle polyethylene powder used for improving the sliding properties of coatings, rubber, etc.

There are proven results for adoption as a PTFE substitute! Micron-sized ultra-high molecular weight polyethylene that imparts lubricity and wear resistance to coatings, rubber, engineering plastics, etc., as a sliding modification additive!

High-dispersion coatings use PTFE powder as an additive, but due to regulatory trends regarding PFOA and similar substances, the future continued use of PTFE is uncertain. This product can be switched from PTFE. It has already been adopted in many coatings such as urethane-based, acrylic-based, and epoxy-based. 【Comparison with PTFE】 - Dispersion Stability: Easier to disperse in coatings compared to PTFE and has excellent storage stability. - Slipperiness: Good slipperiness with a smaller amount of additive compared to PTFE. It also has a matte finish effect. - Effect: Lighter specific gravity than PTFE allows it to appear more on the surface of the coating, maintaining slipperiness for a long time. - Applications: Usable not only in solvent-based systems but also in water-based systems with just a small amount of dispersant. 【Properties】 - Particle Size: Average particle size is 10μ to 60μ (conventional ultra-high molecular weight PE typically has particle sizes over 100μ). - Chemical Resistance: High stability against acids, alkalis, and organic chemicals. - Non-absorbent: Almost no water absorption or moisture absorption occurs, preventing swelling or hydrolysis, and there is no need for preheating. - Hygiene: Brands that comply with FDA standards and are suitable for poly hygiene are also available. *For more details, please refer to the PDF document or feel free to contact us.*

  • 金属部品　写真.jpg
  • ゴム改質.jpg
  • ギア　写真 low. NEWjpg.jpg
  • 携帯.png
  • 木工.png
  • 内装.jpeg
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.